Chapter 23 Network
NWA50AX/NWA90AX/NWA55AXE Series User’s Guide
201
23.3 VLAN
This section discusses how to configure the Zyxel Device’s VLAN settings. See Section 9.3 on page 71 for
more information about VLAN.
Use this screen to configure the VLAN settings for your Zyxel Device. To access this screen, click
Configuration > Network > VLAN.
Figure 131 Configuration > Network > VLAN
Each field is described in the following table.
Table 81 Configuration > Network > VLAN
LABEL DESCRIPTION
VLAN Settings
Management
VLAN ID
Enter a VLAN ID for the Zyxel Device.
Untagged/
Tagged
Set whether the Zyxel Device adds the VLAN ID to outbound traffic transmitted through its
Ethernet port.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
To Next Page
Loading...
