Chapter 9 Network
NWA50AX/NWA90AX/NWA55AXE Series User’s Guide
74
9.4 NCC Discovery
You can manage the Zyxel Device through the Zyxel Nebula Control Center (NCC). Use this screen to
configure the proxy server settings if the Zyxel Device is behind a proxy server.
To access this screen, click Configuration > Network > NCC Discovery.
Figure 51 Configuration > Network > NCC Discovery
Each field is described in the following table.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Table 26 Configuration > Network > VLAN (continued)
LABEL DESCRIPTION
Table 27 Configuration > Network > NCC Discovery
LABEL DESCRIPTION
Nebula Control Center Status
Internet This field displays whether the Zyxel Device can connect to the Internet.
Nebula Connectivity This field displays whether the Zyxel Device can connect to the Zyxel Nebula Control
Center (NCC).
Nebula Control Center Discovery Setting
Enable Select this option to turn on NCC discovery on the Zyxel Device. The Zyxel Device will try
to discover the NCC and go into NCC management mode when it is connected to the
Internet and has been registered in the NCC.
If NCC discovery is disabled, the Zyxel Device will not discover the NCC and remain in
standalone operation.
To Next Page
Loading...
