Chapter 9 Network
NWA50AX/NWA90AX/NWA55AXE Series User’s Guide
75
Use Proxy to Access NCC If the Zyxel Device is behind a proxy server, you need to select this option and configure
the proxy server settings so that the Zyxel Device can access the NCC through the
proxy server.
Proxy Server Enter the IP address of the proxy server.
Proxy Port Enter the service port number used by the proxy server.
Authentication Select this option if the proxy server requires authentication before it grants access to
the NCC.
User Name Enter your proxy user name.
Password Enter your proxy password.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Table 27 Configuration > Network > NCC Discovery
LABEL DESCRIPTION
To Next Page
Loading...
