Chapter 9 Network
NWA50AX/NWA90AX/NWA55AXE Series User’s Guide
73
The VLAN ID associates a frame with a specific VLAN and provides the information that devices need to
process the frame across the network.
Use this screen to configure the VLAN settings for your Zyxel Device. To access this screen, click
Configuration > Network > VLAN.
Figure 49 Configuration > Network > VLAN
Figure 50 Configuration > Network > VLAN (NWA55AXE)
Each field is described in the following table.
Table 26 Configuration > Network > VLAN
LABEL DESCRIPTION
VLAN Settings
Management
VLAN ID
Enter a VLAN ID for the Zyxel Device.
As Native VLAN Select this option to treat this VLAN ID as a VLAN created on the Zyxel Device and not one
assigned to it from outside the network.
Wireless Bridge Vlan Setting
Add Click this to add an entry in the table.
Remove Select an entry and click this to remove the selected entry.
# This field is a sequential value. It is not associated with any VLAN ID.
Wireless Bridge
Vlan ID (1-4094)
Enter a VLAN ID for the wireless bridge. Duplicate VLAN IDs are not allowed.
The VLAN IDs you set on your root AP should be the same as the VLAN IDs you set here. See
Section 1.2 on page 12 for more information on wireless bridge.
To Next Page
Loading...
