Chapter 4 Web Configurator
NWA50AX/NWA90AX/NWA55AXE Series User’s Guide
33
Figure 18 Login Page in Standalone Mode
4 Enter the user name (default: “admin”) and password (default: “1234”). If the Zyxel Device is being
managed or has been managed by the NCC, check the NCC's Site-Wide > Configure > General
settings screen for the Zyxel Device's current password.
5 Select the language you prefer for the Web Configurator. Click Login.
6 The wizard screen opens when the Zyxel Device is accessed for the first time or when you reset the Zyxel
Device to its default factory settings.
7 If you logged in using the default user name and password, the Update Admin Info screen appears.
Otherwise, the dashboard appears.
Figure 19 Update Admin Info Screen
The Update Admin Info screen appears every time you log in using the default user name and default
password. If you change the password for the default user account, this screen does not appear
anymore.
To Next Page
Loading...
