Chapter 5 Broadband
P-661HNU-Fx User’s Guide
101
5.2.1.4 Bridge Mode
Click the Add new WAN Interface in the Network Setting > Broadband
screen or the Edit icon next to the connection you want to configure. Select
Bridge as the encapsulation mode. The following screen appears.
Figure 19 Broadband Add/Edit: Bridge (ADSL)
The following table describes the fields in this screen.
Table 9 Broadband Add/Edit: Bridge (ADSL)
Label
DESCRIPTION
General
Name Enter a service name of the connection.
Type Select ADSL as the interface for which you want to configure here.
The ZyXEL Device uses the ADSL technology for data transmission
over the DSL port.
Mode Select Bridge when your ISP provides you more than one IP address
and you want the connected computers to get individual IP address
from ISP’s DHCP server directly. If you select Bridge, you cannot use
routing functions, such as QoS, Firewall, DHCP server and NAT on
traffic from the selected LAN port(s).
To Next Page
Loading...
