Chapter 24 Backup/Restore
P-661HNU-Fx User’s Guide
259
Reset to Factory Defaults
Click the Reset button to clear all user-entered configuration information and
return the ZyXEL Device to its factory defaults. The following warning screen
appears.
Figure 123 Reset Warning Message
Wait until the ZyXEL Device’s login screen appears. You can also press the RESET
button on the rear panel to reset the factory defaults of your ZyXEL Device. Refer
to Section 1.7 on page 27 for more information on the RESET button.
24.3 The Reboot Screen
System restart allows you to reboot the ZyXEL Device remotely without turning
the power off. You may need to do this if the ZyXEL Device hangs, for example.
Click Maintenance > Reboot. Click the Reboot button to have the ZyXEL Device
reboot. This does not affect the ZyXEL Device's configuration.
To Next Page
Loading...
