ZyXEL Communications P-661HNU - The Dynamic DNS Screen

Chapter 12 Dynamic DNS
P-661HNU-Fx User’s Guide
198
12.2 The Dynamic DNS Screen
Use the Dynamic DNS screen to enable DDNS and configure the DDNS settings
on the ZyXEL Device. To change your ZyXEL Device’s DDNS, click Network
Setting > Dynamic DNS. The screen appears as shown.
Figure 81 Network Setting > DNS
The following table describes the fields in this screen.
Table 47 Network Setting > DNS
LABEL DESCRIPTION
Dynamic DNS Configuration
Active
Dynamic DNS
Select this check box to use dynamic DNS.
Service
Provider
Select the name of your Dynamic DNS service provider.
Dynamic DNS
Type
Select the type of service that you are registered for from your Dynamic
DNS service provider.
Host Name Type the domain name assigned to your ZyXEL Device by your Dynamic
DNS provider.
You can specify up to two host names in the field separated by a comma
(",").
User Name Type your user name.
Password Type the password assigned to you.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.