Chapter 19 Remote MGMT
P-661HNU-Fx User’s Guide
248
19.2 The Remote MGMT Screen
Use this screen to decide what services you may use to access which ZyXEL
Device interface. Click Maintenance > Remote MGMT to open the following
screen.
Figure 113 Maintenance > Remote MGMT
The following table describes the fields in this screen.
Table 74 Maintenance > Remote MGMT
LABEL DESCRIPTION
Services This is the service you may use to access the ZyXEL Device.
LAN/WLAN Select the Enable check box for the corresponding services that you
want to allow access to the ZyXEL Device from the LAN and WLAN.
WAN Select the Enable check box for the corresponding services that you
want to allow access to the ZyXEL Device from the WAN.
Port You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service for remote management.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
To Next Page
Loading...
