Chapter 3 Tutorials
P-661HNU-Fx User’s Guide
41
3.3.1 Example Parameters
The following parameters will be used to configure the ZyXEL Device and the
wireless client.
We use the P-661HNU-F1 web screens and M-302 utility screens as an example.
The screens may vary slightly for different models.
3.3.2 Configuring the AP
Follow the steps below to configure the wireless settings on your AP.
1 Open the Network Setting > Wireless > General screen in the AP’s web
configurator.
Tutorial: Network > Wireless LAN > General
2 Make sure Enable Wireless LAN is selected.
SSID SSID_Example3
802.11 mode 802.11b/g
Channel auto
Security WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
To Next Page
Loading...
