ZyXEL Communications P-661HNU - Chapter 3 Tutorials; Overview; Setting up Your DSL Connection; Tutorials

P-661HNU-Fx User’s Guide
37
CHAPTER 3 1
Tutorials
3.1 Overview
This chapter contains the following tutorials:
• Setting Up Your DSL Connection
• How to Set up a Wireless Network
• Setting Up NAT Port Forwarding
• Using the File Sharing Feature
• Using the Print Server Feature
• Configuring the MAC Address Filter
• Configuring Static Route for Routing to Another Network
• Configuring QoS Queue and Class Setup
• Access the ZyXEL Device Using DDNS
3.2 Setting Up Your DSL Connection
This tutorial shows you how to set up your Internet connection using the Web
Configurator.
If you connect to the Internet through a DSL connection, follow these steps and
use the information from your Internet Service Provider (ISP) to configure the
ZyXEL Device:
1 Connect the ZyXEL Device properly. Refer to the Quick Start Guide for details on
the ZyXEL Device’s hardware connections.
2 Connect one end of a DSL cable to the DSL port of your ZyXEL Device. The other
end should be connected to the DSL port in your house, the DSL/Modem jack on a
splitter or another DSL router/modem provided by your ISP.