Chapter 3 Tutorials
P-661HNU-Fx User’s Guide
38
3 Connect one end of an Ethernet cable to one of the Ethernet ports on the ZyXEL
Device and the other end to the computer that you will use to browse or access
the web configurator.
4 Connect the ZyXEL Device to a power source, turn it on and wait for the POWER
LED to become a steady green. Turn on the modem provided by your ISP as well
as the computer.
Account Configuration
1 Click Network Setting > Broadband to open the screen shown below. Click Add
new WAN Interface.
2 For this example, the interface type is ADSL and the connection has the following
information.
General
Name MyDSLConnection
Type ADSL
Mode Routing
WAN Service
Type
PPP over Ethernet (PPPoE)
ATM PVC Configuration
VPI/VCI 36/48
Encapsulation
Mode
LLC/SNAP-BRIDGING
Service
Category
UBR without PCR
PPP Information
PPP User Name 1234@DSL-Ex.com
PPP Password ABCDEF!
PPPoE Service
Name
My DSL
Authentication
Method
Auto
To Next Page
Loading...
