Chapter 9 DNS Route
P-661HNU-Fx User’s Guide
175
9.2.1 Add/Edit DNS Route Edit
Click Add new DNS route in the DNS Route screen or the Edit icon next to an
existing DNS route. Use this screen to configure the required information for a
DNS route.
Figure 69 DNS Route: Add/Edit
The following table describes the labels in this screen.
Table 36 DNS Route: Add/Edit
LABEL DESCRIPTION
Active Select this to activate this DNS route.
Domain Name Enter the domain name you want to resolve.
You can use the wildcard character, an “*” (asterisk) as the left most part
of a domain name, such as *.example.com. The ZyXEL Device forwards
DNS queries for any domain name ending in example.com to the WAN
interface specified in this route.
WAN Interface Select a WAN interface through which the matched DNS query is sent.
You must have the WAN interface(s) already configured in the
Broadband screen.
Apply Click Apply to save your changes.
Back Click Back to exit this screen without saving.
To Next Page
Loading...
