Chapter 17 System Monitor
P-661HNU-Fx User’s Guide
243
The following table describes the fields in this screen.
17.4 The NAT Status Screen
Click System Monitor > Traffic Status > NAT to open the following screen. You
can view the NAT status of the ZyXEL Device’s client(s) in this screen.
Figure 110 System Monitor > Traffic Status > NAT
The following table describes the fields in this screen.
Table 70 System Monitor > Traffic Status > LAN
LABEL DESCRIPTION
Refresh
Interval
Select how often you want the ZyXEL Device to update this screen from
the drop-down list box.
Interface This shows the LAN or WLAN interface.
Bytes Sent This indicates the number of bytes transmitted on this interface.
Bytes
Received
This indicates the number of bytes received on this interface.
Interface This shows the LAN or WLAN interface.
Sent (Packet)
Data This indicates the number of transmitted packets on this interface.
Error This indicates the number of frames with errors transmitted on this
interface.
Drop This indicates the number of outgoing packets dropped on this interface.
Received (Packet)
Data This indicates the number of received packets on this interface.
Error This indicates the number of frames with errors received on this
interface.
Drop This indicates the number of received packets dropped on this interface.
Table 71 System Monitor > Traffic Status > NAT
LABEL DESCRIPTION
Refresh
Interval
Select how often you want the ZyXEL Device to update this screen from
the drop-down list box.
Device Name This shows the name of the client.
IP Address This shows the IP address of the client.
To Next Page
Loading...
