Chapter 3 Tutorials
P-661HNU-Fx User’s Guide
49
3.3.4 Configuring the Wireless Client using the WPS PIN
number
This section describes how to connect the wireless client to a network using the
WPS PIN method. You need to log into the Web Configurator for this.
1 Place a WPS-enabled device that supports the WPS PIN configuration method near
the ZyXEL Device.
2 Log into the ZyXEL Device’s web configurator at http://192.168.1.1 (see
Introducing the Web Configurator on page 29 for more details on this).
3 In the navigation panel, click Network Setting > Wireless > WPS.
4 Select the Enable check box and click Apply to enable the WPS function.
5 Enter the PIN of the other WPS-enabled device into the Enter PIN here text box
and click Register. You can locate this PIN number in the other device’s utility or
on the device itself. See the other device’s documentation if you cannot locate the
PIN
To Next Page
Loading...
