Chapter 16 VPN
P-661HNU-Fx User’s Guide
220
16.2 VPN Setup Screen
The following figure helps explain the main fields in the web configurator.
Figure 96 IPSec Summary Fields
Local and remote IP addresses must be static.
Click Security > VPN to open the VPN Setup screen. This is a menu of your
IPSec rules (tunnels). The IPSec summary menu is read-only. Edit a VPN by
selecting an index number and then configuring its associated submenus.
Figure 97 Security > VPN > Setup
The following table describes the fields in this screen.
Table 57 Security > VPN > Setup
LABEL DESCRIPTION
Add New
Tunnel
Click this button to set up VPN policies for a new tunnel
# This is the VPN policy index number. Click a number to edit VPN policies.
Active This field displays whether the VPN policy is active or not. A Yes signifies
that this VPN policy is active. No signifies that this VPN policy is not
active.
Tunnel Name This field displays the identification name for this VPN policy.
Local Address This field will display the IP addres used by the ZyXEL Device.
Local Network
Local IP Address
My IP Address
Secure Gateway IP Address
Remote Network
Remote IP Address
Remote
IPSec Router
VPN Tunnel
To Next Page
Loading...
