Chapter 2 Introducing the Web Configurator
P-661HNU-Fx User’s Guide
33
2.2.2 Main Window
The main window displays information and configuration fields. It is discussed in
the rest of this document.
After you click System Info on the Connection Status screen, the System Info
screen is displayed. See Chapter 4 on page 83 for more information about the
System Info screen.
If you click LAN Device on the System Info screen, the Connection Status
screen appears. See Chapter 4 on page 81 for more information about the
Connection Status screen.
If you click Virtual Device on the System Info screen, a visual graphic appears,
showing the connection status of the ZyXEL Device’s ports. The connected ports
are in color and disconnected ports are gray.
2.2.3 Navigation Panel
Use the menu items on the navigation panel to open screens to configure ZyXEL
Device features. The following table describes each menu item.
Table 2 Navigation Panel Summary
LINK TAB FUNCTION
Connection
Status
This screen shows the network status of the ZyXEL
Device and computers/devices connected to it.
Network Setting
Broadband Broadband Use this screen to view, remove or add a WAN
interface. You can also configure ISP parameters,
WAN IP address assignment, DNS servers and other
advanced properties.
3G Backup Use this screen to configure the 3G WAN connection.
Wireless General Use this screen to turn the wireless connection on or
off, specify the SSID(s) and configure the wireless
LAN settings and WLAN authentication/security
settings.
More AP Use this screen to configure multiple BSSs on the
ZyXEL Device.
WPS Use this screen to use WPS (Wi-Fi Protected Setup) to
establish a wireless connection.
WMM Use this screen to enable or disable Wi-Fi MultiMedia
(WMM).
Scheduling Use this screen to configure when the ZyXEL Device
enables or disables the wireless LAN.
To Next Page
Loading...
