Chapter 6 Wireless
P-661HNU-Fx User’s Guide
126
Click Network Setting > Wireless > WMM. The following screen displays.
Figure 31 Network Setting > Wireless > WMM
The following table describes the labels in this screen.
Table 20 Network Setting > Wireless > WMM
LABEL DESCRIPTION
Enable WMM of
SSID1~4
This enables the ZyXEL Device to automatically give a service a priority
level according to the ToS value in the IP header of packets it sends.
WMM QoS (Wifi MultiMedia Quality of Service) gives high priority to voice
and video, which makes them run more smoothly.
Enable WMM
Automatic
Power Save
Deliver (APSD)
Click this to increase battery life for battery-powered wireless clients.
APSD uses a longer beacon interval when transmitting traffic that does
not require a short packet exchange interval.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
To Next Page
Loading...
