Chapter 16 VPN
P-661HNU-Fx User’s Guide
224
Secure Gateway
Address
Type the WAN IP address or the URL (up to 31 characters) of the IPSec
router with which you're making the VPN connection.
If you are not sure of this information you can leave it blank, but do
not use 0.0.0.0.
Local ID Select IP to identify this ZyXEL Device by its IP address.
Select DNS to identify this ZyXEL Device by a domain name.
Select E-mail to identify this ZyXEL Device by an e-mail address.
Content When you select IP in the Local ID Type field, type the IP address of
your computer in the local Content field. The ZyXEL Device
automatically uses the IP address in the My IP Address field (refer to
the My IP Address field description) if you configure the local
Content field to 0.0.0.0 or leave it blank.
It is recommended that you type an IP address other than 0.0.0.0 in
the local Content field or use the DNS or E-mail ID type in the
following situations:
• When there is a NAT router between the two IPSec routers.
• When you want the remote IPSec router to be able to
distinguish between VPN connection requests that come in
from IPSec routers with dynamic WAN IP addresses.
When you select DNS or E-mail in the Local ID Type field,
type a domain name or e-mail address by which to identify this
ZyXEL Device in the local Content field. Use up to 31 ASCII
characters including spaces, although trailing spaces are
truncated. The domain name or e-mail address is for
identification purposes only and can be any string.
Remote ID Select IP to identify the remote IPSec router by its IP address.
Select DNS to identify the remote IPSec router by a domain name.
Select E-mail to identify the remote IPSec router by an e-mail
address.
Table 58 Security > VPN > Setup > Edit
LABEL DESCRIPTION
To Next Page
Loading...
