Chapter 3 Tutorials
P-661HNU-Fx User’s Guide
72
traffic from A to R and then R routes the traffic to B.This tutorial uses the
following example IP settings:
To configure a static route to route traffic from N1 to N2:
1 Click Network Setting > Static Route. Click Add New Static Route.
2 Configure the Static Route Setup screen using the following settings:
• Select Active.
• Specify a descriptive name for this routing rule.
•Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2.
Table 3 IP Settings in this Tutorial
DEVICE / COMPUTER IP ADDRESS
The ZyXEL Device’s WAN 172.16.1.1
The ZyXEL Device’s LAN 192.168.1.1
A 192.168.1.34
R’s N1 192.168.1.253
R’s N2 192.168.10.2
B 192.168.10.33
N2
B
N1
A
R
To Next Page
Loading...
