Chapter 3 Tutorials
P-661HNU-Fx User’s Guide
74
Note: QoS is applied to traffic flowing out of the ZyXEL Device.
Traffic that does not match this class is assigned a priority queue based on the
internal QoS mapping table on the ZyXEL Device.
QoS Exampl e
1 Click Network Setting > QoS > General and check Active. Set your WAN
Managed Upstream Bandwidth to 1000 kbps (or leave this blank to have the
ZyXEL Device automatically determine this figure). Click Apply to save your
settings.
Tutorial: Advanced > QoS
2 Go to Network Setting > QoS > Queue Setup. Click Add new Queue to create
a new queue. In the screen that opens, check Active and enter or select the
following values, then click Apply.
• Name: Email
• Priority: 7 (High)
• Weight: 15
1000 kbps
DSL
E-mail: Queue 7
Your computer
IP=192.168.1.23
A colleague’s computer
Other traffic: Automatic classifier
and/or
MAC=AA:FF:AA:FF:AA:FF
ZyXEL Device
To Next Page
Loading...
