ZyXEL Communications P-661HNU - Page 84

Chapter 4 Connection Status and System Info Screens
P-661HNU-Fx User’s Guide
84
IP Subnet
Mask
This field displays the current subnet mask in the WAN.
LAN Information
IP Address This field displays the current IP address of the ZyXEL Device in the
LAN.
IP Subnet
Mask
This field displays the current subnet mask in the LAN.
DHCP Server This field displays what DHCP services the ZyXEL Device is providing to
the LAN. Choices are:
Server - The ZyXEL Device is a DHCP server in the LAN. It assigns IP
addresses to other computers in the LAN.
None - The ZyXEL Device is not providing any DHCP services to the
LAN.
WLAN Information
Channel This is the channel number used by the ZyXEL Device now.
WPS Status Configured displays when the WPS security settings have been
configured and wireless clients can connect with the device through
WPS. Unconfigured displays when the device has not been configured
and wireless clients can’t establish a link with the device through WPS.
SSID (1~4)
Information
SSID This is the descriptive name used to identify the ZyXEL Device in the
wireless LAN.
Status This shows whether or not the SSID is enabled (on).
Security
Mode
This displays the type of security the ZyXEL Device is using in the
wireless LAN.
Interface Status
Interface This column displays each interface the ZyXEL Device has.
Status This field indicates whether or not the ZyXEL Device is using the
interface.
For the DSL interface, this field displays Down (line is down), Up (line
is up or connected), Initializing (line is initializing), Establishing Link
(line is establishing a link) if you're using Ethernet encapsulation and
Down (line is down), Up (line is up or connected), Idle (line (ppp)
idle), Dial (starting to trigger a call) and Drop (dropping a call) if
you're using PPPoE encapsulation.
For the LAN interface, this field displays Up when the ZyXEL Device is
connected through an Ethernet cable to a computer or a HUB. It
displays Down when the ZyXEL Device’s Ethernet port is disconnected.
For the WLAN interface, it displays Active when WLAN is enabled or
InActive when WLAN is disabled.
LABEL DESCRIPTION