Chapter 5 Broadband
P-661HNU-Fx User’s Guide
98
5.2.1.3 Routing- PPPoA
Click the Add new WAN Interface in the Network Setting > Broadband
screen or the Edit icon next to the connection you want to configure. Select
Routing as the encapsulation mode and PPoA as the WAN service type.
Figure 18 Broadband Add/Edit: Routing- PPPoA
The following table describes the fields in this screen.
Secondary
DNS Server
Enter the second DNS server address assigned by the ISP.
Apply Click Apply to save your changes.
Back Click Back to return to the previous screen.
Table 7 Broadband Add/Edit: Routing- IPoE (continued)
Label
DESCRIPTION
Table 8 Broadband Add/Edit: Routing- PPPoA
Label
DESCRIPTION
General
Name Enter a service name of the connection.
Type ADSL: The ZyXEL Device uses the ADSL technology for data
transmission over the DSL port.
Mode Select Routing (default) from the drop-down list box if your ISP give
you one IP address only and you want multiple computers to share an
Internet account.
To Next Page
Loading...
