. . .
[99-INF]: 0
Guidelines and description for diag command
adsl diag [--logstart < nBytes to store statuses > ] [--logpause ] [--logstop] [--loguntilbufferfull]
[--loguntilretrain]
adsl --logstart :
Start logging statues locally and will wrap around when the buffer is full
adsl --logpause :
Pause logging
adsl --logstop :
Stop logging session.
adsl --loguntilbufferfull :
Log statuses until the buffer is full
adsl --loguntilretrain :
Log until the modem retrain
To retrieve the logged statuses, connect DslDiags and issue “dbgcmd=25 4”
Guidelines and description for snrclamp command
adsl snrclamp [--shape <shapeId>] [--bpshape [bpIndex-bpLevel,]
--shape :
Set one of the pre-defined shapes shapeIds in [0,1,2]
--bpshape :
Set shape as defined by the bpIndex-bpLevel pairs
Example
>adsl snrclamp --bpshape 1-1,128-32,512-128
EXIT CODES
Exit codes less than 100 are assigned by the ADSL driver. Exit codes of 100 or greater are assigned by the
adsl utility.
BCMADSL_STATUS_SUCCESS 0
BCMADSL_STATUS_ERROR 1
ADSL_GENERAL_ERROR 100
ADSL_ALLOC_ERROR 101
ADSL_INVALID_COMMAND 102
ADSL_INVALID_OPTION 103
ADSL_INVALID_PARAMETER 104
ADSL_INVALID_NUMBER_OF_OPTIONS 105
To Next Page
Loading...
