ADSL_INVALID_NUMBER_OF_PARAMETERS 106
EXAMPLES
° A simple initialization.
> adsl start [--up]
or
> adsl start
> adsl connection --up
° A more complex initialization.
> adsl start --up --mod d l--lpair I
or
> adsl start
> adsl connection --up --mod dl --lpair I
° Getting in and out of the test modes
> adsl connection –-reverb
…
> adsl connection --up
° Selecting tones
> adsl connection --tones 0 32 0xFEFFFF7F 32 224 0xFEFFFFFFFFFFFF7F
selects tones from 1 to 31 for upstream and from 33 to 95 for downstream
° Starting and monitoring BERT
> adsl bert –start 60
to run BERT test for 60 seconds. After about 20 seconds of BERT running the results will look like:
> adsl bert –show
adsl: BERT results:
BERT Status = RUNNING
BERT Total Time = 60 sec
BERT Elapsed Time = 20 sec
BERT Bits Tested = 0x0000000008B4C700 bits
BERT Err Bits = 0x0000000000000067 bits
After 60 seconds when the BERT has completed the results of –show command will be:
> adsl bert –show
adsl: BERT results:
BERT Status = NOT RUNNING
To Next Page
Loading...
