--lpair <(i)nner|(o)uter>:
(i)nner –inner loop pair is used
(o)uter – outer loop pair is used
--trellis <on|off> :
Enabled or disables trellis coding
--snr <snrQ4> :
Specify SNR margin as Q4 number
--bitswap <on|off> :
Enables or disables XDSL bitswap
--sesdrop <on|off>:
Enables or disables SESdrop
--sra <on|off> :
Enables or disables SRA
--CoMinMgn <on|off> :
Enables or disables Co Minimum Margin Drop
--i24k <on|off> :
Enables or disables i24k
[--phyReXmt <0xBitMap-UsDs>] :
Enables or disables phy Re-transmit feature in US and DS
--TpsTc <0xBitMap-AvPvAaPa> :
Enable or disable ATM and PTM modes in VDSL (AvPv) and Xdsl (AaPa)
--profile <0x00 – 0x7F> | <”8a |8b |8c |8d |12a |12b |17a 30a”> :
VDSL profile selection. More than one profile to enable several profiles
[--us0 <on|off>] :
Enable/disable UpStream0 in VDSL2 mode
--forceJ43 <on|off> :
Enable or disable forceJ43
--toggleJ43B43 <on|off> :
Enable or disable toggleJ43B43
The following options apply to AnnexC only
--bm <(D)BM|(F)BM> :
To Next Page
Loading...
