Get the current mcs set
chanspecs
Get all the valid chanspecs (default: all within current locale):
-b band (5(a) or 2(b/g))
-w bandwidth, 10,20 or 40
[-c country_abbrev]
chanspec
Set <channel>[a,b][n][u,l]
channel number (0-224)
band a=5G, b=2G, default to 2G if channel <= 14
bandwidth, n=10, none for 20 & 40
ctl sideband, l=lower, u=upper
OR Set channel with legacy format:
-c channel number (0-224)
-b band (5(a) or 2(b/g))
-w bandwidth, 10,20 or 40
-s ctl sideband, -1=lower, 0=none, 1=upper
dfs_channel_forced
Set <channel>[a,b][n][u,l]
channel number (0-224)
band a=5G, b=2G, default to 2G if channel <= 14
bandwidth, n=10, non for 20 & 40
ctl sideband, l=lower, u=upper
tssi
Get the tssi value from radio
txpwr
Set tx power in milliwatts. Range [1, 84].
txpwr1
Set tx power in in various units. Choose one of (default: dbm):
-d dbm units
-q quarter dbm units
-m milliwatt units
Can be combined with:
-o turn on override to disable regulatory and other limitations Use wlctl txpwr -1 to restore
defaults
txpathpwr
Turn the tx path power on or off on 2050 radios
To Next Page
Loading...
