ZyXEL Communications VMG1312 - Page 81

81
ZyXEL Confidential
www.zyxel.com
txpwrlimit
Return current tx power limit
powerindex
Set the transmit power for A band(0-63).
-1 - default value
atten
Set the transmit attenuation for B band. Args: bb radio txctl1.
auto to revert to automatic control
manual to supspend automatic control
phyreg
Get/Set a phy register:
offset [ value ] [ band ]
radioreg
Get/Set a radio register:
offset [ value ] [ band/core ]
HTPHY:
Get a radio register: wlctl radioreg [ offset ] [ cr0/cr1/cr2 ]
Set a radio register: wlctl radioreg [ offset ] [ value ] [ cr0/cr1/cr2/all ]
ucflags
Get/Set ucode flags 1, 2, 3(16 bits each)
offset [ value ] [ band ]
shmem
Get/Set a shared memory location:
offset [ value ] [band ]
macreg
Get/Set any mac registers(include IHR and SB):
macreg offset size[2,4] [ value ] [ band ]
ucantdiv
Enable/disable ucode antenna diversity (1/0 or on/off)
gpioout
Set any GPIO pins to any value. Use with caution as GPIOs would be assigned to chipcommon
Usage: gpiomask gpioval
devpath print device path
pllreset