ZyXEL Communications VMG1312 - Page 85

85
ZyXEL Confidential
www.zyxel.com
8 - WSEC in software
0x80 - FIPS enabled
0x100 - WAPI enabled
auth
set/get 802.11 authentication type. 0 = OpenSystem, 1= SharedKey, 2=Open/Shared
wpa_auth
Bitvector of WPA authorization modes:
1 WPA-NONE
2 WPA-802.1X/WPA-Professional
4 WPA-PSK/WPA-Personal
64 WPA2-802.1X/WPA2-Professional
128 WPA2-PSK/WPA2-Personal
0 disable WPA
wpa_cap
set/get 802.11i RSN capabilities
set_pmk
Set passphrase for PMK in driver-resident supplicant.
scan
Initiate a scan.
Default to an active scan across all channels for any SSID.
Optional arg: SSIDs, list of [up to 10] SSIDs to scan (comma or space separated).
Options:
-s S, --ssid=S SSIDs to scan
-t ST, --scan_type=ST [active|passive|prohibit] scan type
--bss_type=BT [bss/infra|ibss/adhoc] bss type to scan
-b MAC, --bssid=MAC particular BSSID MAC address to scan, xx:xx:xx:xx:xx:xx
-n N, --nprobes=N number of probes per scanned channel
-a N, --active=N dwell time per channel for active scanning
-p N, --passive=N dwell time per channel for passive scanning
-h N, --home=N dwell time for the home channel between channel scans
-c L, --channels=L comma or space separated list of channels to scan
iscan_s
Initiate an incremental scan.
Default to an active scan across all channels for any SSID.
Optional arg: SSIDs, list of [up to 10] SSIDs to scan (comma or space separated).
Options:
-s S, --ssid=S SSIDs to scan
-t ST, --scan_type=ST [active|passive|prohibit] scan type
--bss_type=BT [bss/infra|ibss/adhoc] bss type to scan
-b MAC, --bssid=MAC particular BSSID MAC address to scan, xx:xx:xx:xx:xx:xx