ZyXEL Communications VMG1312 - Page 86

86
ZyXEL Confidential
www.zyxel.com
-n N, --nprobes=N number of probes per scanned channel
-a N, --active=N dwell time per channel for active scanning
-p N, --passive=N dwell time per channel for passive scanning
-h N, --home=N dwell time for the home channel between channel scans
-c L, --channels=L comma or space separated list of channels to scan
iscan_c
Continue an incremental scan.
Default to an active scan across all channels for any SSID.
Optional arg: SSIDs, list of [up to 10] SSIDs to scan (comma or space separated).
Options:
-s S, --ssid=S SSIDs to scan
-t ST, --scan_type=ST [active|passive|prohibit] scan type
--bss_type=BT [bss/infra|ibss/adhoc] bss type to scan
-b MAC, --bssid=MAC particular BSSID MAC address to scan, xx:xx:xx:xx:xx:xx
-n N, --nprobes=N number of probes per scanned channel
-a N, --active=N dwell time per channel for active scanning
-p N, --passive=N dwell time per channel for passive scanning
-h N, --home=N dwell time for the home channel between channel scans
-c L, --channels=L comma or space separated list of channels to scan
scancache_clear
clear the scan cache
escan
Start an escan.
Default to an active scan across all channels for any SSID.
Optional arg: SSIDs, list of [up to 10] SSIDs to scan (comma or space separated).
Options:
-s S, --ssid=S SSIDs to scan
-t ST, --scan_type=ST [active|passive|prohibit] scan type
--bss_type=BT [bss/infra|ibss/adhoc] bss type to scan
-b MAC, --bssid=MAC particular BSSID MAC address to scan, xx:xx:xx:xx:xx:xx
-n N, --nprobes=N number of probes per scanned channel
-a N, --active=N dwell time per channel for active scanning
-p N, --passive=N dwell time per channel for passive scanning
-h N, --home=N dwell time for the home channel between channel scans
-c L, --channels=L comma or space separated list of channels to scan
escanabort
Abort an escan.
Default to an active scan across all channels for any SSID.
Optional arg: SSIDs, list of [up to 10] SSIDs to scan (comma or space separated).
Options:
-s S, --ssid=S SSIDs to scan
-t ST, --scan_type=ST [active|passive|prohibit] scan type