--bss_type=BT [bss/infra|ibss/adhoc] bss type to scan
-b MAC, --bssid=MAC particular BSSID MAC address to scan, xx:xx:xx:xx:xx:xx
-n N, --nprobes=N number of probes per scanned channel
-a N, --active=N dwell time per channel for active scanning
-p N, --passive=N dwell time per channel for passive scanning
-h N, --home=N dwell time for the home channel between channel scans
-c L, --channels=L comma or space separated list of channels to scan
passive
Puts scan engine into passive mode
regulatory
Get/Set regulatory domain mode (802.11d). Driver must be down.
spect Get/Set 802.11h Spectrum Management mode.
0 - Off
1 - Loose interpretation of 11h spec - may join non-11h APs
2 - Strict interpretation of 11h spec - may not join non-11h APs
3 - Disable 11h and enable 11d
4 - Loose interpretation of 11h+d spec - may join non-11h APs
scanabort
Abort a scan.
scanresults
Return results from last scan.
iscanresults
Return results from last iscan. Specify a buflen (max 8188)
to artificially limit the size of the results buffer.
iscanresults [buflen]
assoc
Print information about current network association.
(also known as "status")
status
Print information about current network association.
(also known as "assoc")
disassoc
Disassociate from the current BSS/IBSS.
chanlist
Deprecated. Use channels.
To Next Page
Loading...
