rssi_levels: Variable number of RSSI levels (maximum 8) in increasing order (e.g. -85 -70 -60).
An event will be posted each time the RSSI of received beacons/packets crosses a level.
fasttimer
Deprecated. Use fast_timer.
slowtimer
Deprecated. Use slow_timer.
glacialtimer
Deprecated. Use glacial_timer.
radar
Enable/Disable radar
radarargs
Get/Set Radar parameters in
order as version, npulses, ncontig, min_pw, max_pw, thresh0,
thresh1, blank, fmdemodcfg, npulses_lp, min_pw_lp, max_pw_lp,
min_fm_lp, max_span_lp, min_deltat, max_deltat,
autocorr, st_level_time, t2_min, fra_pulse_err, npulses_fra,
npulses_stg2, npulses_stg3, percal_mask, quant,
min_burst_intv_lp, max_burst_intv_lp, nskip_rst_lp, max_pw_tol, feature_mask
radarargs40
Get/Set Radar parameters for 40Mhz channel in
order as version, npulses, ncontig, min_pw, max_pw, thresh0,
thresh1, blank, fmdemodcfg, npulses_lp, min_pw_lp, max_pw_lp,
min_fm_lp, max_span_lp, min_deltat, max_deltat,
autocorr, st_level_time, t2_min, fra_pulse_err, npulses_fra,
npulses_stg2, npulses_stg3, percal_mask, quant,
min_burst_intv_lp, max_burst_intv_lp, nskip_rst_lp, max_pw_tol, feature_mask
radarthrs
Set Radar threshold for both 20 & 40MHz BW:
order as thresh0_20_lo, thresh1_20_lo, thresh0_40_lo, thresh1_40_lo
thresh0_20_hi, thresh1_20_hi, thresh0_40_hi, thresh1_40_hi
dfs_status
Get dfs status
interference
Get/Set interference mitigation mode. Choices are:
0 = none
1 = non wlan
2 = wlan manual
To Next Page
Loading...
