Chapter 1 Introduction
WAP6807 User’s Guide
14
The following table describes the icons used in the figure.
Note: Your router must have an Internet connection whether it supports MPro Mesh or not.
Note: If your router supports Zyxel MPro Mesh, it will serve as the router controller in a Mesh
network with the WAP6807.
If your router does not support Zyxel MPro Mesh, your WAP6807 will automatically
become the AP controller.
1.4 Dual-Band WiFi
By default, the wireless LAN (WLAN) is enabled on the WAP6807. IEEE 802.11a/b/g/n/ac compliant
clients can wirelessly connect to the WAP6807 to access network resources.
The WAP6807 is a dual-band extender that can use both 2.4GHz and 5GHz networks at the same time.
You could use the 2.4 GHz band for regular Internet surfing and downloading while using the 5 GHz
band for time sensitive traffic like high-definition video, music, and gaming.
Figure 6 Dual-Band Application
Table 1 Icon Used in Figure 5
ICON DESCRIPTION
C router controller (MPro Mesh Router in Scenario 1, see Section 3.6.1 on
page 27) or AP controller (the first Extender in Scenario 2, see Section 3.6.2
on page 28)
AP Access Point
RP Repeater
C1 Client 1
C2 Client 2
APC Access Point coverage area
RPC Repeater coverage area
To Next Page
Loading...
