ZyXEL Communications WAP6807 - Basic Screen; G; 5 G Interface Configuration

Chapter 8 Wireless LAN
WAP6807 User’s Guide
68
Figure 43 Wireless > WiFi Configuration (repeater)
Click Trigger Wi-Fi On-boarding to activate MPro Mesh.
Note: To trigger MPro Mesh successfully, we recommend using a router that supports Zyxel
MPro Mesh for your network.
8.5 2.4G/ 5G Interface Configuration
8.5.1 Basic Screen
Use this screen to view read-only information on the 2.4G/ 5G wireless radios.
Click Wireless > WiFi Configuration > 2.4G/ 5G Interface Config > Basic to open the following screen.