Chapter 1 Introduction
WAP6807 User’s Guide
15
1.5 Setting Up Multiple Wireless Groups
Company A wants to create different wireless network groups for different types of users as shown in the
following figure. Each group has its own SSID and security mode.
• Employees in Company A will use a general Company wireless network group.
• Higher management level and important visitors will use the VIP group.
• Visiting guests will use the Guest group, which has a different SSID and password.
Company A will use the following parameters to set up the wireless network groups.
1.6 Daisy Chain
You can add more extenders to your network to form a daisy chain. Daisy chain refers to the
connection from the first WAP6807 to other WAP6807s to extend the WiFi connection from the router to
the client. The WAP6807 uplink connection determines the mode: Access Point or Repeater.
• If the WAP6807 has a wired uplink connection, it is in AP mode.
• If the WAP6807 has a wireless uplink connection, it is in RP mode.
Here are some example scenarios for the WAP6807’s daisy chain connection:
Table 2 WiFi settings for different wireless network group
COMPANY VIP GUEST
SSID Company VIP Guest
Security Level More Secure More Secure More Secure
Security Mode WPA2-PSK WPA2-PSK WPA2-PSK
Pre-Shared Key ForCompanyOnly 123456789 guest123
To Next Page
Loading...
