Chapter 7 System
WAP6807 User’s Guide
62
Figure 33 System > Restore/ Firmware Upgrade
7.5.1 Restore
Information related to factory defaults, backup configuration, and restoring configuration appears as
shown next.
Figure 34 System > Restore/ Firmware Upgrade
Backup Configuration
Backup Configuration allows you to back up (save) the WAP6807’s current configuration to a file on your
computer. Once your WAP6807 is configured and functioning properly, it is highly recommended that
you back up your configuration file before making configuration changes. The backup configuration file
will be useful in case you need to return to your previous settings.
Click Backup to save the WAP6807’s current configuration to your computer.
Back to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the WAP6807 to its
factory defaults. The following warning screen appears.
To Next Page
Loading...
