ZyXEL Communications WAP6807 - Page 40

Chapter 4 Web Tutorials
WAP6807 User’s Guide
40
1 Make sure that your WAP6807 is turned on, and your notebook is within range of the WAP6807’s WiFi
signal.
2 Push and hold the WPS button located on the WAP6807 until the WiFi LED starts blinking slowly.
Alternatively, log into the WAP6807’s Web Configurator, and then go to the Wireless > WiFi
Configuration> Interface Configurations- 2.4G/5G Main> WPS screen. Click the Connect button on the
screen.
3 In Windows 10, click on the Network icon in the system tray to open the list of available WiFi networks.
4 Locate the WiFi network of the WAP6807. The default WiFi network name is “Zyxel_XXXX” (2Ghz) or
Zyxel_XXXX_5G” (5Ghz). Then click Connect.