Chapter 4 Web Tutorials
WAP6807 User’s Guide
43
security mode.
• Employees in Company A will use a general Company WiFi network group. For more information on
setting up general WiFi network group, see Section 4.2.1 on page 38.
• Visiting guests will use the Guest group, which has a different SSID and password.
Company A will use the following parameters to set up the WiFi network group.
1 Click Wireless> WiFi Configuration> 2.4G interface Guest 1> Config to open the Interface Configurations-
2.4G Guest 1 screen. Configure the screen using the provided parameters and click Apply.
Table 18 WiFi Settings Parameters Example
GUEST
SSID Guest
Security Mode WPA2-PSK
Pre-Shared Key guest123
To Next Page
Loading...
