ZyXEL Communications WAP6807 - Page 52

Chapter 5 Web Configurator
WAP6807 User’s Guide
52
Note: You can also access the Network and Sharing Center by going to the Control Panel in
the Start Menu and clicking Network and Sharing Center.
2 Once you have accessed the Network and Sharing Center, click Local Area Connection to access the
adapter’s settings.
3 After accessing the connection’s general settings, click the Properties button.
Note: You can also access the adapter’s settings by clicking Change adapter settings on the
left side bar. Then right-clicking the Local Area Connection icon and selecting
Properties.
4 In the connection’s properties select Internet Protocol Version 4 (TCP/IPv4), then click Properties.