Chapter 5 Web Configurator
WAP6807 User’s Guide
54
1 Open your System Preferences, then click Network.
2 Once the Network screen is open, it is recommended you click Location > Edit Locations to create a
new profile. Use the + button to add a new profile, in this case it is called Static IP. This will easily help you
change from static IP address to automatic.
3 After creating your Static IP profile, make sure it is selected, then click the Configure IPv4 scroll button
and select Manually. Then modify your IP Address, your computer must be in the same subnet in order
to access this website address.You must give it a fixed IP address in the range between 192.168.1.3 and
192.168.1.254 (except 192.168.1.5). Then type 255.255.255.0 as your subnet mask, and click Apply to save
your changes.
To Next Page
Loading...
