Chapter 1 Introduction
WRE6505 v2 User’s Guide
12
1.4.1 Wi-Fi Protected Setup
Your WRE6505 v2 supports Wi-Fi Protected Setup (WPS), which is an easy way to set up a secure
wireless network. WPS is an industry standard specification, defined by the Wi-Fi Alliance.
WPS allows you to quickly set up a wireless network with strong security, without having to
configure security settings manually. Each WPS connection works between two devices. Both
devices must support WPS (check each device’s documentation to make sure).
Depending on the devices you have, you can either press a button (recommended) on the device
itself, or in its configuration utility or enter a PIN (a unique Personal Identification Number that
allows one device to authenticate the other) in each of the two devices. When WPS is activated on
a device, it has two minutes to find another device that also has WPS activated. Then, the two
devices connect and set up a secure network by themselves.
For more information on using WPS, see Section 7.3 on page 38.
Hold for 5 to 10 seconds he WRE6505 v2 keeps its configuration and reboots.
Hold for more than 10
seconds
TThe WRE6505 v2 resets its configuration to factory defaults and reboots. See
Section 2.4 on page 18.
Table 2 WPS Button Functions
ACTION RESULT
To Next Page
Loading...
