WRE6505 v2 User’s Guide
68
CHAPTER 11
One Connect
11.1 Overview
One Connect is a ZyXEL-proprietary feature. It complies with the IEEE 1905.1 standard and allows
auto-detection and auto-configuration.
If your wireless router supports ZyXEL One Connect, WRE6505 v2 for example, you can download
and install the ZyXEL One Connect App in your mobile device to check the connection status, do
speed test, turn on or turn off the devices in your network, block or allow a device’s access and set
up a guest Wi-Fi network from the mobile device. You can even use the App to access the WRE6505
v2’s web configurator. The mobile device with the App installed must be connected to the WRE6505
v2 wirelessly.
Figure 43 ZyXEL One Connect App
11.1.1 What You Can Do
Use the One Connect screen to enable or disable Wi-Fi auto-configuration (Section 11.2 on page
68).
11.2 One Connect Screen
Use this screen to enable or disable Wi-Fi auto-configuration on the WRE6505 v2.
Click Configuration > Network > OneConnect to open the following screen.
Figure 44 Configuration > Network > OneConnect
To Next Page
Loading...
