Chapter 12 Maintenance
WRE6505 v2 User’s Guide
78
12.9 System Mode
Use this screen to change the operating mode of the WRE6505 v2. For further information on
system operating mode, see Section 3.1.1 on page 19.
Figure 56 Maintenance > System Mode
The following table describes the labels in this menu.
Table 33 Maintenance > System Mode
LABEL DESCRIPTION
AP Mode Select this option to set the WRE6505 v2 to act as an access point.
Normal mode The default WPS behavior, both 2.4 GHz and 5 GHz bands are supported in up and down
broadcasting.
To Next Page
Loading...
