ZyXEL Communications WRE6505 v2 - Chapter 10 LAN; 10.2 LAN IP Screen

WRE6505 v2 User’s Guide
66
CHAPTER 10
LAN
10.1 Overview
This screen allows you to assign the WRE6505 v2 a fixed or dynamic management IP address. The
default IP address of the WRE6505 v2 is 192.168.1.2. Alternatively, you can connect to the
WRE6505 v2 using the default domain name, http://zyxelsetup.
10.2 LAN IP Screen
Use this screen to change the WRE6505 v2’s management IP address and configure the DNS server
information that the WRE6505 v2 sends to the DHCP clients. Click Network > LAN.
Note: If you change the IP address of the WRE6505 v2 in the screen below, you will need
to log into the WRE6505 v2 again using the new IP address.
Figure 42 Network > LAN > IP
The following table describes the labels in this screen.
Table 26 Network > LAN > IP
LABEL DESCRIPTION
LAN TCP/IP
Get from DHCP
Server
Select this to have the WRE6505 v2 get a dynamic IP address from a DHCP server.
User Defined LAN
IP Address
Click this to enable the manual IP configuration.