Chapter 12 Maintenance
WRE6505 v2 User’s Guide
75
Figure 49 Firmware Upgrading
The WRE6505 v2 automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 50 Network Temporarily Disconnected
After the WRE6505 v2 restarts, the Upgrade Accomplished screen appears.
Figure 51 Upgrade Accomplished
Refresh the web page and log in again and check your new firmware version in the Status screen.
12.7 Backup / Restore Screen
Click Maintenance > Backup/Restore. Information related to factory defaults, backup
configuration, and restoring configuration appears as shown next.
To Next Page
Loading...
