ZyXEL Communications WRE6505 v2 - Selecting an AP by Manually Entering Security Information

Chapter 7 Tutorials
WRE6505 v2 User’s Guide
43
3 Configure the wireless settings between the WRE6505 v2 and its wireless clients. The WRE6505 v2
automatically copies the SSID of the associated AP and appends “.speed” to the 5GHz SSID. Click
Apply to save settings and restart the WRE6505 v2.
Figure 22 Tutorial: Configure WRE6505 v2’s WLAN
4 You have successfully set up your WRE6505 v2 to connect to an AP. Click GO to go to the Status
screen.
Figure 23 Tutorial: Saving settings
7.4.2 Selecting an AP by Manually Entering Security Information
This example shows you how to configure wireless security settings with the following parameters
on your WRE6505 v2.
Follow the steps below to create a secure wireless network by manually entering the AP’s wireless
security settings in the WRE6505 v2’s interface.
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see Section 2.2 on page 13).
1 Open the Network > Wireless LAN 2.4G or Wireless LAN 5G > AP Select screen. Select
Choose Network Manually.
SSID ZyXEL
Security WPA(2)-PSK
Wi-Fi Key 1234567890