ZyXEL Communications WRE6505 v2 - Navigation Panel; Resetting the WRE6505 V2

Chapter 2 The Web Configurator
WRE6505 v2 User’s Guide
18
2.3.2 Navigation Panel
Use the menu items on the navigation panel to open screens to configure WRE6505 v2 features.
The following table describes the icons shown in the navigation panel.
2.4 Resetting the WRE6505 v2
If you forget your password or IP address, or you cannot access the Web Configurator, press the
WPS button for more than 10 seconds to reload the factory-default configuration file. This means
that you will lose all configurations that you had previously saved, the password will be reset to
1234.
1 Make sure the power LED is on.
2 Press and hold the WPS button. After 10 seconds, the power LED begins flashing.
3 Release the WPS button. The WRE6505 v2 reloads factory defaults and begins to reboot.
About Click this icon to view copyright and a link for related product information.
eaZy123 Click this icon to open the wizard. See Chapter 6 on page 33.
Table 7 Title Bar: Web Configurator Icons (continued)
LABEL DESCRIPTION
Table 8 Navigation Panel Menu Icons
ICON DESCRIPTION
Click this icon to see the Status page. The information in this screen depends on the device
mode you select.
Click this icon to see the Monitor navigation menu.
Click this icon to see the Configuration navigation menu.
Click this icon to see the Maintenance navigation menu.