ZyXEL Communications WRE6505 v2 - Quality of Service (Qos) Screen; WPS Screen

Chapter 9 Wireless LAN
WRE6505 v2 User’s Guide
62
9.9 Quality of Service (QoS) Screen
The QoS screen allows you to automatically give a service (such as VoIP and video) a priority level.
Click Network > Wireless LAN 2.4G or Wireless LAN 5G > QoS. The following screen appears.
Figure 37 Network > Wireless LAN 2.4G/5G > QoS
The following table describes the labels in this screen.
9.10 WPS Screen
Use this screen to enable/disable WPS, view or generate a new PIN and check current WPS status.
To open this screen, click Network > Wireless LAN 2.4G or Wireless LAN 5G > WPS tab.
Figure 38 Network > Wireless LAN 2.4G/5G > WPS
Table 22 Network > Wireless LAN 2.4G/5G > QoS
LABEL DESCRIPTION
Enable WMM QoS Check this to have the WRE6505 v2 automatically give a service a priority level
according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi
MultiMedia Quality of Service) gives high priority to voice and video, which makes
them run more smoothly.
Apply Click Apply to save your changes to the WRE6505 v2.
Reset Click Reset to reload the previous configuration for this screen.