Chapter 12 Maintenance
WRE6505 v2 User’s Guide
77
Figure 53 Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default WRE6505 v2 IP address (192.168.1.2).
Refer to your operating system’s help files for details on how to set up your computer’s IP address.
12.7.3 Back to Factory Defaults
Click the Reset button to clear all user-entered configuration information and return the WRE6505
v2 to its factory defaults. The following warning screen appears.
Figure 54 Reset Warning Message
You can also press the WPS button (see Section 1.4 on page 11) on the front panel for more than
10 seconds to reset the factory defaults of your WRE6505 v2. Refer to Section 1.4 on page 11 for
more information on the resetting the WRE6505 v2.
12.8 Restart Screen
System restart allows you to reboot the WRE6505 v2 without turning the power off. Click
Maintenance > Restart. The following screen displays. Click Restart to have the WRE6505 v2
reboot. This does not affect the WRE6505 v2's configuration.
Figure 55 Maintenance > Restart
To Next Page
Loading...
