Chapter 11 One Connect
WRE6505 v2 User’s Guide
69
The following table describes the labels in this screen.
Table 27 Configuration > Network > OneConnect
LABEL DESCRIPTION
One Connect
Auto-configuration Select Enable to allow the WRE6505 v2 to automatically update the wireless settings on
the APs or wireless repeaters (which also support ZyXEL One Connect) in its network.
Select Disable to turn this feature off if you want to have the APs or repeaters in the
network use different wireless settings.
Apply Click Apply to save your changes back to the WRE6505 v2.
Reset Click Reset to reload the previous configuration for this screen.
To Next Page
Loading...
